You cannot place a new order from your country. United States

STOMPAMP - StompAmp Brown with JetLink - 30W Head Amplifier

STOMPAMP-BROWN-JETLINK

New product

2 Items

Add to wishlist

More info

StompAmp brown: the 30 Watt high efficiency head amplifier built to be the heart of your pedalboard. Now with JetLink the unique speaker emulator to get the proper 4x12 cabinet sound.

Made in Italy

The sound is incredible: the volume is undreamed for a 30 Watt stomp box size head amplifier. The weight is only 350g. 

Inspired by classic vintage amps and built with analog technology, StompAmp brown has a special circuit called ‘V-Stack’ which is specifically designed to give you a great sound from the classic clean all the way up to a stunning overdrive, with shimmering harmonics.

The incredible dynamic allows you to maintain an extreme notes definition by holding the gain to maximum and controlling compression and distortion through the guitar volume to go from clean, to crunch, to lead.

The effect loop, extremely neutral and quiet, is exactly where you need it, close to your effect pedal minimizing the length of the cables and preserving the silence and sound.

JetLink is a unique analog speaker emulator which is specifically designed to simulate a 4x12 cabinet with innovative technological solutions that besides giving you a powerful and natural sound performance, also removes the annoying ground loop issue.

The sound of your amplifier is related to the speakers, the cabinet and the cross-interactions they have with the amplifier; in live or during recording, the kind of microphones and their relative position also play a key role. 
To Simulate all this is the main challenge that the speaker emulators attempt to master.

JetLink is the cutting edge analog speaker emulator: the sophisticated technique of signal elaboration which supports many of the infinite singularity systems speaker-cabinet-amp-microphone. StompAmp brown powered by JetLink gives you the proper emotions as when playing in a 4x12 premium Cabinet whenever you play: Stage performances or Studio recording.

JetLink is equipped by a 6.3mm stereo output jack (balanced for maximum reduction of noise using a stereo jack or unbalanced using a mono jack).

Wiring connection:

StompAmp brown with JetLink is designed to operate in the following modes:

  • Connecting to the speaker (red jack) + direct connection to the board-mixer (JetLink)
  • connection only (red jack)
  • Sole connect to the board-mixer(JetLink)

No need for any selection, StompAmp brown just routes the signal to the appropriate outputs according to the connection you made. 
When the output is not connected to the power, the unit is on standby. 
Caution: Do not connect the red output jack to the board-mixer(red Jack)

StompAmp brown:

  • Potenza di uscita: 30 Watt RMS @ 8Ohm / 22 Watt RMS @ 16Ohm
  • Impedenza di ingresso: 1MOhm
  • Jack input e Output : 1/4 inch - 6,3 mm
  • Controlli: Volume, Gain, Bass, Medium, High
  • Effects Loop: Serial – Send, Return
  • LED: Power on
  • Maximum dimensions included knobs (LPA, cm): 12,6 x 9,8 x 5,4
  • Weight (g): 350

Included power supply:

  • Input: 90-264 VAC
  • Output: 24VDC, 3A
  • Dimensions (LPA, cm) : 13,2 x 5,8 x 3,05
  • Weight (g): 345
  • Power cable: included in the package

The package includes:

  • StompAmp brown
  • Power supply
  • Power cable
  • Manual

Reviews

No customer reviews for the moment.

Write a review

STOMPAMP - StompAmp Brown with JetLink - 30W Head Amplifier

STOMPAMP - StompAmp Brown with JetLink - 30W Head Amplifier